There are different parts of an air conditioner you can remove, such as the filter or cover. So, if you are looking for how to remove an LG air conditioner part, this article is for you.
Table of Contents
How to Remove Cover from LG Split Air Conditioner
An LG split air conditioner usually has a cover that is screwed to the body. Removing the cover will mean unmounting some screws. To begin, press the Power button on the air conditioner to run it off. Next, pull the power cord from the wall outlet to disconnect it from electric power. You do not want to have the unit running while you remove the cover.
Check to see if there are screws holding the cover to the indoor unit. If there is, you will need a screwdriver to remove them. Some models may have clips securing the cover in place, and they are usually easier to remove. You will not need a screwdriver to do it.
After removing the clips or screws, you may want to determine whether or not the cover is sitting on hinges. If so, carefully lift it off the hinges before lowering it to prevent any damage.
How to Remove the Cover of an LG Window Air Conditioner
To remove the cover of an LG window air conditioner, press the Power button to turn off the unit. Also, disconnect the power cord from the wall outlet to cut off the electricity supply to the unit. Most models will allow you to lift the cover’s bottom a little up and pull it out. Next, unhook the top part to remove it completely from the unit. If this is hard to do, it may be stuck or have a few screws holding it in place.
Find and consult the user manual to determine whether or not your specific model has screws or simply pulls up and out. Do not force it if it has no screws, but apply a little more pressure to loosen it from the unit. However, use a screwdriver to remove any screws that may be securing it to the unit.
Removing the Cover on the Outside
While the air conditioner is still off and unplugged from the wall outlet, with the front cover off, pull the unit towards you and out of the window. Put it down in an area that gives you space to remove the cover. Find a helper to help you carry the unit if necessary.
Next, lay the unit on one side to give you access to the screws securing the cover. Using a nut driver, unmount the screws and set the unit on its bottom. Now, use the nut driver to unmount the screws on both sides of the air conditioner holding the case to the front of the unit.
After that, slightly bend the unit towards the back, ensuring you securely hold the front part. You will find a brace between the unit’s inside part and the cover on both sides. Your helper should hold the unit while you find the braces. Once removed, you can lift the unit out of the cover and set it aside. Contact LG Support Center for further assistance if you are unsure of the process.
How to Remove an LG Air Conditioner Filter
The process of removing an air filter from an LG air conditioner will depend on the model. If it is a window or through-the-wall unit, you may be able to pull the handle up and slide the filter out from behind the front grille. In some cases, you will need to pop the front grille off first before you can remove the filter.
For split units, you can typically lift the front panel up and slide the filter out. And portable units need you to remove the front cover before removing the filters; there are usually more than one. To remove the front cover in order to access the filter or for disassembly purposes, ensure you turn the unit off and disconnect it from electric power.
Some models have screws holding the front cover in place while others can be snapped off the unit. If yours have screws, use a nut driver or screwdriver to loosen and remove them. Otherwise, pull the cover with a gentle force until it snaps out to reveal the filers. Then, lift the filters out from the unit.
Note: You may have to remove the cables and exhaust hose before removing the cover on your LG portable air conditioner.
Check out these other articles…
LG Air Conditioner WiFi [Problems & Solutions]
LG Air Conditioner Timer [How to, Issues & Solutions]
LG Air Conditioner Fan [Problems & Solutions]
Air Conditioner Compressor [Problems & Solutions]
Air Conditioner Condenser [Guide, Problems & Solutions]
Air Conditioner Capacitor [Guide, Problems & Solutions]
Air Conditioner Control [Detailed Guide, Issues & Solutions]
How to Remove an LG Air Conditioner from Window
Press the Power button to turn off the air conditioner. Next, disconnect the power cord from the outlet on the wall. After that, pull out the air conditioner’s front cover and place it somewhere safe.
For the next step, you will need someone to help you. Unmount the screws on one side of the air conditioner and set the screws aside in a safe place. Move to the other side and remove the rest of the screws; put them in the same space as the rest. If you are going to use the air conditioner or screws again, ensure you know where each screw fits.
Now, open the window and balance the unit. Next, carefully lift the air conditioner from the window with your helper holding one side and you holding the other side. Put it down on a towel you lay on the floor and put it out of your way.
Always use the services of a qualified technician to remove an air conditioning unit if you are unsure of the steps. The steps may be technical and the unit may be heavy, so you may need some help.
How to Remove Water from an LG Portable Air Conditioner
Ensure you turn off the air conditioner using the Power button and pull the power plug from electricity. Move the air conditioner close to a floor drain or connect a drain hose to the drain and channel into a container or outside. This article is a detailed explanation of how to remove water from your LG portable air conditioner.
Recap
Knowing how to remove an LG air conditioner cover, filter, front grille, or any other part, following the instructions in the user manual. You can follow this detailed guide to remove the parts you need, including water from a portable air conditioner.
It is crucial to use the services of a certified HVAC technician to fix your air conditioner if there are errors. Also, resetting it fixes minor faults, so you may want to reset the unit. Finally, regularly maintain the air conditioner to keep it in optimal functioning shape.
